Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended. Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
Features
- Paint directly over mold, mildew and stains.
- Kills existing mold, mildew and odor-causing bacteria.
- Protective, water-based formula for interior and exterior use.
- Binds to chalky siding, masonry, metal, plaster and more.
- Ideal for residential, commercial and industrial environments.
- For extensive stains, pair with a Zinsser stain-blocking primer.
Specifications
| Age Recommendation |
Ages 16 and Up |
| Applicable Surface Material |
Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood |
| Application Method |
Brush; Roller |
| Application Temperature Range |
50° to 80° F |
| Binder/Vehicle Ingredient(s) |
Styrene Acrylic |
| Color Family |
White |
| Color(s) |
White |
| Compliance Standards |
EPA Reg. No. 87469-1-69587 |
| Cure/Dry-Time Range |
30 min (Touch); 1 h (Handle/Recoat); 7 days (Full Cure) |
| Diluent/Solvent Ingredient(s) |
Ethylene Glycol; Water |
| Disclaimer Statement |
Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours. |
| Finish/Sheen |
Flat |
| Footnote 1 |
Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil |
| Footnote 2 |
Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil |
| Global Product Type |
Building/Construction Paints & Primers |
| Intended Application Environment |
Interior/Exterior |
| Maximum Coverage Area |
400 to 450 sq ft |
| Number of Colors |
1 |
| Packaging Type |
Bucket/Pail |
| Paint Sub-Category |
Primer; Water-Based |
| Pigment/Dye/Filler Ingredient(s) |
Calcium Carbonate |
| Post-Consumer Recycled Content Percent |
0% |
| Pre-Consumer Recycled Content Percent |
0% |
| Product Biodegradability in Days |
0 |
| Product Biodegradability Indicator |
N |
| Product Compostability Indicator |
N |
| Recommended Level of Ventilation |
Moderate |
| Total Recycled Content Percent |
0% |
| Volume Capacity |
1 gal |
